.st0{fill:#FFFFFF;}

How to Propagate Snake Plant? The 4 Best Ways! 

 April 26, 2022

By  admin

Snake Plant is a popular houseplant that can be easily propagated in small pots. These propagate very quickly and will grow into an impressive 15 foot tall plant after only 3 months of growth! This plant should be discussed among friends with the best methods for propagation on hand.

snake plant propagation in water is a great way to propagate snake plants. The 4 best ways are to use the “snake plant propagation in water“, “snake plant propagation with soil”, “snake plant propagation by air” and “snake plant propagation by seed”.

How to Propagate Snake Plant? The 4 Best Ways!

There are affiliate links in this post. We may get a commission if you click and purchase, at no extra cost to you. For additional information, please visit our disclosure policy.

It’s simple to cultivate, doesn’t take much attention, and can flourish practically anyplace. Is it, however, as simple to propagate a snake plant?

You most likely have one Sanseviera at home, which makes the environment much more pleasant and vibrant. It’s been growing for a long time and now it’s really stunning!

However, the plant has just begun to outgrow its container. As a result, it is in pain. And you’re at a loss on what to do…

What is the solution? Transfer the puppies or leaves to a new location. 

Isn’t that insanely difficult? So, how are you going to do it? Don’t worry, it’s not as complicated as it may seem…

Contents

Is it possible to propagate a snake plant?

Let’s start with the obvious: a Sansevieria can be propagated. It’s also simple.

You’ll undoubtedly read and hear some folks who say the exact opposite on the internet. 

Don’t pay attention to them. It is perfectly feasible to propagate a snake plant. 

Again, if you follow our instructions, you may produce snake plants SAFELY and EASILY. 

When people claim it’s impossible, it’s because they either performed it incorrectly or didn’t give the plant enough time to root. 

We’ll teach you how to avoid all of that, so your Sansevieria may thrive in the long run. 

When Should Snake Plants Be Propagated?

Let’s imagine you’re undecided about propagating the snake plant. What would you do if you didn’t know?

Here are a few indicators that your Sansevieria should be propagated:

  • Some leaves are breaking or bending, while others are dropping off the pot or garden bed. This indicates that the plant is overgrown and needs to be pruned (so you can relocate the cut portions)
  • Root rot is afflicting the plant, although just a few leaves are displaying symptoms. The ones that are in good health may be propagated.
  • It no longer looks attractive in the pot or in the garden. It seems to be excessively large or large to you. So you’d want to alter that.

Aside from that, you can just wish to proliferate it for the sake of propagation. Take a pup or a leaf from its current location and put it somewhere else. 

What’s more, you can do it whenever you choose. Snake plants are succulents that may be grown at any time of year (but their roots grow best in the spring!). 

Do you remember that? 

The 4 Best Ways to Grow a Snake Plant 

To propagate a snake plant, you don’t need to be an experienced gardener. That is something we can assure you of.

However, you must ensure that you use the proper procedure. We’ll explain why in the following paragraphs:

1. Soil Propagation using Leaf Cuttings

This is perhaps the simplest and most common option. It’s not hard to see why.

When leaf cuttings are placed directly in the soil, they grow the quickest. They root quite rapidly and deliver virtually immediate fulfillment (which you won’t have to worry about).

If you wish to transplant into a container or garden, this is a great option. 

This is how it works:

  • Begin by collecting the necessary supplies, which include cactus soil, rooting hormone, a sharp knife or pruners, and a pot or garden ready.
  • Now go ahead and cut the leaf you’ll be using. It’s preferable to utilize a healthy leaf than one that is damaged or diseased. 
  • Measure at least 2 inches from the bottom to the tip for the cut. Then, using the knife, make a V shape (the tip of the V pointing up).
  • The leaf cutting is now in your possession (s). Now is the time to fill the pot/garden with the cactus soil mix. 
  • Then, in the portion of the leaf you just cut, add some rooting hormone. Allow a few minutes for it to absorb the liquid. 
  • Make a tiny hole in the dirt big enough for the leaf cutting to pass through without falling out. Then carefully put the leaf into it.
  • Pour some water over the soil to moisten it. Then give it time to develop. When the soil becomes dry, water it. 
  • Finish by relocating the pot to a location where it will get at least 6 hours of sunlight every day (or make it so in the garden).

You’ve used soil to grow a snake plant leaf cutting. Let’s move on to the other techniques now!

2. Water Propagation using Leaf Cuttings

Snake plants love soil, but they may also thrive in water. It is, however, a little riskier. Because soil lacks certain nutrients, the leaf cutting must be as healthy as possible.

But it’s still doable, and it’s really rather enjoyable. This is a great suggestion for individuals who don’t yet have a place to cut their leaves (or want to take it somewhere and need to travel for a few days first).

In any case, here’s how to reproduce in water:

  • Gather your supplies first, starting with the rooting hormone, knife, and the jar/container into which you’ll be putting the water. 
  • Make a V shape at the bottom of the leaf. From the bottom to the tip, measure at least 4 inches. Allow a few days for the leaf cutting to heal. 
  • Then take it in your hands and pour the rooting hormone into the leaf’s bottom. Allow a few hours for it to soak.
  • Put the leaf cutting in the water now. The water should not completely drown the leaf (only about half of it should be submerged), and it should rest on the margins (preferably straight).
  • You simply need to check for algae every few days. The water has a tendency to get filthy quickly. If it does, replace it with new water.

Within a few days, roots and new leaves will emerge from the bottom. So, after a few months, you’ll have a growing snake plant in water — doesn’t that sound fantastic?

Maintain in mind that the plant will be more vulnerable in water than in soil, so keep the liquid clean and the plant free of pests. 

3. Snake Plant Dividing

The division technique is also known as the division method. It’s a common technique to propagate plants, particularly snake plants.

This would be the ideal option for snake plants that have outgrown their space. Those that no longer fit in their pot or garden, or seem uncomfortable for their size, might benefit from some division.

The goal is to detach the leaves from the roots so that you may transplant several fully developed leaves. 

Here’s how to make it happen:

  • Remove the snake plant from its current location first (likely a pot). It should be done cautiously so as not to harm the roots. Then, before extracting the leaves, carefully dig the sides with a shovel.
  • You can now see the root of the tree. Check to see whether it can be divided into many components. At least two probable divisions or “clumps” (roots with leaves) should be seen.
  • Grab each clump hard to separate them. Then gently pull them apart from one other. You may also use a knife, although this may result in cuts in places you don’t want them to be (so be extra careful). 
  • Prepare the pot/garden in which you’ll be planting the division (s). Cactus soil mix may work, however if feasible, we suggest using the same soil as previously. 
  • Finish by replanting each cluster to its original depth. If the leaves need assistance keeping straight, use a wool cord to bind them down.

Propagating by division is a strategy that seldom fails and is rather simple, so don’t miss it. 

4. Rhizome Propagation of a Snake Plant

Snake plants, believe it or not, may grow without leaves from a rhizome (root). 

Yes, you read it correctly. Typically, this rhizome, or horizontally growing root, generates pups. These are the plant’s “babies,” sometimes known as offsets. When properly planted, a healthy rhizome will attempt to produce these pups for as long as the circumstances permit.

If you merely want to grow the plant someplace else but don’t want to trim the leaves, this is a great option.

The best part is that it is quite simple:

  • Gather the following items first: newspaper, a sharp knife or scissors, pots/garden space, a shovel, and succulent soil mix. 
  • To begin, remove the snake plant from its pot/garden. Dig carefully with the shovel, then pull it out the same manner. 
  • Examine the rhizomes while holding the plant. Remove a piece of the clump that has no leaves and near the boundaries of the clumps. It should be somewhat self-contained.
  • Clean your sharp knife or shears and cut away that area. For the greatest effects, it should be between 2 and 4 inches long. 
  • Pour the dirt into a pot/garden while holding the rhizome. Then plant—no there’s need for rooting hormone or water at this point. Just keep it to a depth of no more than 0.5 inches.
  • Replace the snake plant in its original location and monitor its health. Then, for a few weeks, maintain watering both. 
  • Within 2 to 4 weeks of planting, you should observe the rhizome develop. If not, you most likely committed a mistake. 

This is the most difficult technique of snake plant multiplication, but it’s also one of the most gratifying. So, assuming it works, you’ll have a fun!

Most Commonly Asked Questions (FAQs)

Outside, where should a snake plant be planted?

It should be in a location that receives at least 6 hours of sunshine every day. The reason for this is because snake plants thrive in the light. They are unable to function without them.

What is the best place to maintain a snake plant at home?

There’s basically no limit to where you may put snake plants inside as long as they get enough sunshine. However, if there is a desired location, it is one where they may also get some warmth (no less than 50 degrees Fahrenheit). 

How quickly does a snake plant regrow?

It is determined on the propagation mechanism you choose. Leaf cuttings, for example, begin to grow within a few days after being planted. Divisions, on the other hand, begin developing nearly immediately once the roots have established. You may need to wait a few weeks or maybe longer for rhizome growth. 

What is the recommended amount of water for a snake plant?

The basic guideline is that snake plants should be watered whenever the soil becomes dry. In dry settings, this implies once a day, and once a week in damp ones. 

Is it possible for a snake plant to thrive in direct sunlight?

No, but yes. What exactly does it imply? Snake plants, unlike cactuses and desert plants, thrive in the light. Too much sun will eventually cause harm. If the leaves begin to yellow, move the snake plant to a less sunny location for a bit.

When should snake plant puppies be separated?

You may separate them as long as the puppies seem to be in good condition and the plant has fully grown. It is, nevertheless, preferable to do so in the spring. 

Is it possible for a snake plant to survive the winter?

Yes, but only when they’re kept inside or in a safe environment. If you’re leaving a snake plant outside when the frosts approach, for example, attempt to protect it from the snow and winds. Otherwise, it will most likely get unwell very quickly. 

It’s Time to Get That Snake Plant Growing!

Begin spreading the snake plant as soon as possible. Don’t squander any more time!

It might take up to 2 or 3 weeks to observe any development, depending on the technique you choose to propagate snake plants.

You don’t want to wait that long, do you?

So, instead, why don’t you start spreading right away? Use the procedures outlined above and follow our recommendations. That snake plant is eagerly awaiting your arrival!

The “snake plant water propagation time lapse” is a video that shows the process of propagating snake plants. This video will show you how to propagate your own snake plant.

Related Tags

  • how to separate snake plant
  • how long does it take to propagate snake plant in water
  • propagating snake plant in soil
  • snake plant propagation problems
  • how to cut snake plant leaves

Emil Schoene


Born and raised in Austin, TX I come from a background of home renovation. By helping my family in my younger years with their construction business, I learned the ropes quickly and as I grew it became my passion that I still do today. Looking to share my knowledge with others. I invite you to leave comments on any post as I know you will have questions that you are not finding anywhere else.

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}